tinting instructionFAQcutting servicesample booksnew productsdownloadsdealerlegalsabout uscontact

Tinting instruction and video for adhesive films PDF Print E-mail
Tinting instruction and video for adhesive films. Here you find a gluing instruction for self adhesive IFOHA window films. For a faster overview we have generated a gluing video. Should you feel unconfident, whether you are able to apply self adhesive sun protection- or concealed protection films without wrinkles and bubbles, so let us tell you, it is easier as you think it is. However, should you desire a laying service for a more extensive project, so please send us your detailed request.
   
ADHESION Instruction: After adhesion of glass decor films, the coverage paper can be also detached the next day, in the event of mixing the mounting concentrate to "soapy", or if the film parts are to filigree: With glass decor films the "clear spots" on the glass remain not pasted. The coverage paper holds the motive together. Should, after treatment with the squeegee, the motive not stick on the glass but still on the coverage paper, then just give it some time (1-2 hours at room temperature), for the water to dry and then pull the coverage paper off.

With adhesion of spy mirror films (inside, 1001010), protection against cold films (inside, 1001015), year-long film (inside, 1001530), electromagnetic pollution films (inside, 1001540) please do not interchange the sides, since the adhesive is not tangible! The full adhesive strength develop after some hours. Please order the yellow mounting concentrate (2200230) for these 4 films!

Please do not use soap or washing-up liquids for the wet adhesion. Please solely use our special concentrate for IFOHA window films in order to activate the film's adhesive as specified and that unwanted, remaining discolourations of the adhesive are excluded. Please do not apply films outside under +5°.

Possible white colouration of the adhesive after the fitting disappear, depending on climatic conditions (room temperature), after a few hours or days. It is a matter of residual moisture, which etch the environment friendly adhesive of the film. Since it is water soluble, discolouration is barely unavoidable, but not harmful!